| Beschreibung | Small Flatbed Autoloading Trailer:
- The trailer frame, rims, and tipper body are all color selectable.
- The trailer has 5 different body configurations:
- Standard flatbed bale/transport trailer (cost $15,500).
- Tipper body without cover (additional cost $15,000).
- Add cover to tipper body (additional cost $1,000)
- Log forks (additional cost $1,500).
- Liquid tank (cost $10,000) and slurry/digestate spreader with an 18 meter work width (cost $2,500) as an additional configuration.
- Can be configured as a flat hitch or a gooseneck trailer hitch.(cost $1,500).
- The gooseneck coupler height is adjustable for different vehicles.
- A rear trailer hitch is also an option. (cost $100)
- The standard Lizard tires and rims are custom made.
- The trailer is equipped with ramps for loading and transporting small machinery.
- The ramps work both with the flatbed option and the tipper body options to load small machines in the tipper body.
- The cover has a collision and there cannot be a vehicle or other products in the tipper when closing it.
- Tipper capacity - 22,440 Liters.
- Can carry up to 8 meter logs.
- Support for the FS22_UniversalAutoload mod.
- Support for the FS22_SelectableBaleCapacity mod.
- Logs can be automatically loaded when used with the FS22_UniversalAutoload mod. (PC/Mac only)
- The strobe lights are custom modeled and have real lights as well so they will reflect off the surroundings.
- Trailer has dedicated gamepad button controls and keyboard/mouse controls to adjust the gooseneck and front pin hitch heights to not conflict with other key bindings.
- Flatbed trailer can be configured to autoload round and square bales.
*NOTE: These capacities are without using the FS22_UniversalAutoload mod.
150 Small Square Bales (1.2 meter Conventional Bales)
20 1.8 meter Square Bales
18 2.2 meter Square Bales
16 2.4 meter Square Bales
10 Hesston Square bales
18 1.25 meter Round Bales
14 1.5 meter Round Bales
14 1.8 meter Round Bales
3 Round Cotton Bales
1 Square Cotton Bale
- To use autoload with a keyboard and mouse, key "B" starts and stops loading.
Then key "Y" is for unloading bales using the left mouse button to place them where desired or to unload them directly to the bed for manual unloading.
After unloading, key "Y" must be pressed again to "reset" the autoloading process for the next load.
NOTE* The FS22_UniversalAutoload mod is not required for bale autoloading to work however for pallets to autoload you will need the FS22_UniversalAutoload mod installed as well. (PC/Mac only)
To use the autoload feature with the FS22_UniversalAutoload mod, the trailer's configuration needs to be set to the standard "Flat Bed" configuration (first body configuration choice).
With the FS22_UniversalAutoload mod it is also possible to autoload logs when configured as a logging trailer. (autoloading logs is not possible on consoles).
To use the autoloading bales feature without the FS22_UniversalAutoload mod(this option is available on all platforms), the trailer's configuration needs to be set to the "Autoload Bales" configuration (second body configuration choice).
Changelog 2.0.0.1:
- Cleaned up un-necessary and repetitive descriptions in ModDesc.
- Fixed issue of trailer only loading 3 Hesston bales.
- Fixed gamepad and keyboard controls.
- Added dedicated key bindings for unloading bales with autoload while using gamepad controllers and/or a keyboard and mouse.
- Added support to autoload all 1x - 9x bales from the FS22_selectableBaleCapacity mod.
|
